































840W (2x420W) MPPT solar array + 600W on-grid inverter
Saving electricity costs made easy: thanks to this complete solar power package for your home! Simply connect the solar modules to the microinverter and this via a suitable socket to your home power grid. The generated solar power will already support the operation of your appliances - whether washing machine, dryer or refrigerator. As a result, the electricity demand at your supplier is reduced. And you save money!
Reduces negative effects of shade and dust: The solar modules do not get the same amount of sun at all times. Sometimes one is partially in the shade, sometimes dirt and dust has settled on the other. This reduces the efficiency of your solar system. Thanks to flexible control via microinverter, you can still ensure optimum energy yield!
Stay in control via app - even worldwide: Control all functions directly on the display of your smartphone and tablet PC. for example, check at any time how much power your solar modules are currently generating and compare it with values from the last few days or months.
Meets the highest safety standards: Your new WLAN microinverter has been tested according to VDE standards and application rules and thus meets the highest protection and safety requirements.
Note: Electricity from solar power systems up to 600 watts can be fed in via a standard socket. However, as a general rule, installation should only be carried out by competent persons. For installations of more than 600 watts, the installation must be carried out by a specialist electrical company! Please also observe the requirements of your network operator and local legal regulations.
- WLAN microinverter including adapter cable M25 to open cable ends (3-core), adapter cable M25 to Betteri, cable M25 to M25 (for series connection), WLAN antenna and mounting material as well as 2 monocrystalline solar modules with connection cables, feed cable Betteri socket to earthing contact plug and German instructions
WLAN microinverter
- On-grid system for feeding power into the 230-volt house grid
- Integrated MPPT charge controller for 2 solar panels: particularly efficient power output
- MPPT voltage range: 22 to 60 volts DC
- Tested according to VDE standards and application rules
- WiFi compatible: for WLAN standards IEEE 802.11b/g/n (2.4 GHz)
- Free app for iOS and Android: for setting power, checking and comparing power data, also for different days, and for timers
- Weatherproof: IP65
- Connection for 2 solar panels with MC4 connector and up to 375 watts each
- Maximum efficiency: 99.5
- Input current: max. 2x 12 A
- Short circuit current: 2x 15 A
- PV nominal power: 580 Watt, maximum output power: 600 Watt
- Maximum power output efficiency: 95
- Ambient temperature: -20 to +50 °C
- Output voltage: 230 Volt AC (open cable ends for connection), current: max. 2.6 A
- Dimensions: 283 x 200 x 42 mm, weight: 1,44 kg
Solar panel
- Patented fullscreen technology: frame and solar cells form a flat plane, rainwater flows off unhindered and washes away dust, dirt & Co. with it
- State-of-the-art solar half cells: for highest efficiency due to reduced electrical losses
- Very high efficiency: 21.03
- 132 monocrystalline solar half cells for high efficiency and long service life
- 3 bypass diodes: ensure optimal current yield and prevent defects
- Power (Pmax): 420 watts
- Power tolerance: +/- 5 W
- Max. Mains voltage (Vmp): 38.0 V DC
- Open circuit voltage (Voc): 45.6 V DC
- Max. Current (Imp): 11.05 A
- Short circuit current (Isc): 11.48 A DC
- Max. system voltage: 1,500 V DC
- Waterproof: IP68
- Connection cable with MC4 compatible plug, length: 30 cm, cross section: 4 mm²
- Dimensions: approx. 192 x 104 x 3.2 cm, weight: 22 kg