LiFePO4 battery 4.8 kWh with solar hybrid inverter 5.5 kW and WLAN
Making the most of your own solar power: Your new hybrid inverter allows you to store your self-generated solar power. This way, you also benefit from inexpensive energy at night.
The battery has a lot to offer and can withstand a lot: The 100 Ah LiFePO4 battery provides an incredible 4,800 Wh of energy for your home appliances. The LiFePO4 battery is highly superior to conventional lead-acid batteries.
Power from different sources: Draw power not only from your solar system, but also from the grid or the LiFePO4 battery. If one power source fails, two others simply step in. This way you can ensure that all important devices such as lights, heating and pumps work at all times.
Prioritizable power sources: Flexibly adjust your new solar hybrid inverter to your needs.
Control and evaluation via free app: Connect the included WLAN module and pair your mobile device via app. Now you can conveniently control your inverter via app and evaluate all parameters in detail - even worldwide!
Note: It is recommended to have the installation done by an electrician.
- Solar Hybrid Inverter SHI-5500 including LiFePO4 battery, WLAN module (with antenna, cable, 2 screws), network cable, connection cable set (SC25-6 with ring eyelets) and German manual
Hybrid Inverter
- For power supply by solar system and battery as well as generator or mains: power sources can be prioritized
- Setting options for charging current, charging, input and output voltage, output frequency, battery type, timer and more
- Increases the efficiency of your solar system up to 98
- Automatically adjusts the input voltage to the solar system
- Integrated MPPT charge controller with up to 100 A charge current: compensates for fluctuations in the optimal operating point of solar cells
- Pure sine wave: supplies household appliances with power
- Control and evaluation via WLAN and app possible (WLAN module included)
- Short-circuit, overload and overheating protection
- Suitable for 48 V batteries, 12 V batteries connected in series and solar systems up to 6,000 W
- Power output: 5,500 watts
- Input voltage: 90 - 280 V AC
- Maximum PV array open circuit voltage (VOC): 500 V DC
- MPPT voltage range: 120 - 450 V DC
- Operating temperature: -10 - +50 °C
- Storage temperature: -15 - +60 °C
- Humidity: 5 - 95 % RH (non-condensing)
- Dimensions: 44 x 30 x 10 cm, weight: 9,7 kg
Solar storage tank
- Absolutely maintenance-free LiFePO4 battery with BMS technology
- Reliable performance even in case of partial discharge
- Low self-discharge: long storage is possible
- Integrated battery management system (BMS) with high-performance processor for optimized charge and discharge control
- LiFePO4 technology
- Delivery in charged condition
- Parallel connection with up to 15 additional batteries possible
- Nominal capacity: 100 Ah / 4,800 Wh
- Rated voltage (output): 48 volts DC
- Discharge current: up to 120 A
- Cut-off voltage: 42 volts DC
- Charging voltage: 54.75 volts DC
- Charging current: up to 100 A
- Voltage for float current: 52.5 volts DC
- After 6,000 charging cycles, the battery still reaches 80% of its initial capacity, up to 10 years service life
- Integrated power switch and safety shutdown
- Cells: Class A (CATL)
- Splash-proof: IP44
- Interfaces: RS232, RS485, CAN
- Dimensions: 41 x 59 x 15,5 cm, weight: 47 kg
WLAN module:
- WiFi compatible: supports WLAN standard 802.11b/g/n (2.4 GHz)
- Free app for iOS and Android: for control and evaluation
- Weatherproof: IP65
- Power supply: 5 V DC - Solar inverter - Also relevant or suitable to: Photovoltaics