Marten repellent for easy installation in the car
Martens are no longer at home only in the forest, but also in settlements and cities.
When they bite cables, brake hoses and rubber sleeves due to their territorial behavior , this is not only annoying and expensive, but can also become a safety risk.
With the repellent device you can reliably keep the unloved "rodents" at a distance. with the extremely unpleasant high-frequency sound for martens, the device beats the martens into flight.
The device emits a high-frequency tone for 15 seconds and repeats this after another 15 seconds.
Choose yourself between continuous operation (in intervals) or whether the device sends signals only when the engine is switched off. You specify this during installation.
The power consumption is absolutely minimal even in continuous operation. the device consumes less than the clock in your car!
The installation is very easy:
You simply connect the small box to your car battery and store it in a suitable place in the engine compartment.
Note:
For optimal functioning, we recommend that you perform an engine wash or use a scent mark remover before use, as well as clean the car parking space. This will eradicate any residual scent from previous marten visits.
Technical data:
- Marten repellent device for motor vehicles
- Frequency: 12.000 Hz
- Intervals: 15 seconds each on and off time
- Sound pressure: approx. 85 dB
- Power supply: 12 V
- Power consumption: approx. 0.1 Watt
- Fine-wire fuse: 200 mA/250 V
- Housing dimensions: 88 x 22 x 57 mm, weight: approx. 65 g
- Connection cable: plus, minus and cable for terminal 15 or for ground, with reverse polarity protection
- Cable length: approx. 25 cm
- With function LED
- Continuous operation in intervals or stop function: If you connect the cable for terminal 15 (ignition), the signal transmitter starts only when the engine is switched off
- Incl. mounting