- Solar set consisting of LiFePO4 battery, charge controller MPPT-110 with 6 cable sleeves, solar module with 4 suction cups, solar module connection cable, connection cable (battery to charge controller) and German instructions
Charge Controller:
- Supports MMPT (Maximum Power Point Tracking): compensates for fluctuations in the optimal operating point of solar cells, ensuring the greatest possible power at all times
- Charges all commercially available 12 and 24 volt batteries
- Charging power at 12 volts: 130 watts, at 24 volts: 260 watts
- Effective protection against overload, short circuit, overvoltage, discharge and polarity reversal
- LCD display for indication of function modes
- USB charging port for smartphone, tablet PC and more: 5 V, up to 1.2 A / 6 watts
- Connectors: Screw terminals for cables with up to 10 mm²
- Working voltage: 12 / 24 V (automatic switching)
- Maximum charging current: 10 A
- Maximum solar module / PV open circuit voltage: 100 volts
- Working temperature: -20 to +55 °C
- For relative humidity up to 90
- Connections: Screw terminals for solar module, battery and working unit
- Dimensions: 156 x 127 x 43 mm, weight: 360 g
LiFePO4 battery:
- Also suitable for permanent installation, e.g. in motorhomes (a DC/DC converter may be required for charging at the alternator)
- Reliable performance even when partially discharged
- Low self-discharge: long storage is possible
- Integrated battery management system (BMS) for optimized charge and discharge control: protects the battery in terms of efficiency and service life
- LiFePO4 technology with many advantages over lead-acid batteries: much lighter, twice as effective discharge and charge capacity, 6x longer life, safer, maintenance-free
- State: filled and charged
- Series and parallel connection with up to 4 batteries possible
- Nominal capacity: 150 Ah / 1920 Wh
- Rated voltage: 12.8 V
- Charging current: 100 A
- After 3,000 charging cycles the battery still reaches 80% of its initial capacity, up to 10 years lifetime
- Two fold-out carrying handles for easy transport
- Connection: M8 screw connection
- Dimensions: approx. 35 x 25 x 19 cm, weight: 17 kg
Monocrystalline solar module:
- Flexible: can be adjusted to curved surfaces for flat mounting
- Power: 200 watts
- Mains voltage (Vmp): max. 21.6 volts
- Open circuit voltage (Voc): 25.95 volts
- Short circuit current (Isc): 9.75 A DC
- Rated current (Imp): max. 9.26 A DC
- Maximum system voltage: 1,000 volts DC
- Connection cable with MC4 connector: 90 cm length
- Temperature resistant: -20 to 60 °C
- Saltwater resistant: also suitable for marine use
- Waterproof: IP67
- Mass solar panel: 152,5 x 68 x 0,3 cm, weight: 3 kg
Solar panel connection cable
- Crimped wire end sleeves for charge controller with screw terminal connection
- Waterproof, weather-resistant and UV-resistant
- Highly flexible and designed for high mechanical stress
- Complies with IEC60228, 60332-1-2, 60754, 60811-2-1, 61034, 61215, TÜV EN50618
- System voltage up to 1,000 V
- Rated current: 40 A
- Length: 5 m, Cable cross-section: 4 mm², Weight: 500 g
Connection cable battery to charge controller:
- M8 cable lug for easy connection to a battery
- Rated voltage: 1,500 V DC, 0.6 kV AC (1 kV max.), Rated current: 70 A
- Temperature range: -40 to 80 °C
- Weatherproof: IP65
- Length: 150 cm, Cross section: 6 mm², Weight: 210 g
